Starting in 2025, the EcO smart monitor will feature replaceable sensors, extending its life more than ever. Here’s how to replace them!
1️⃣ Unscrew the top cover
Using a Torx T8 screwdriver, unscrew the 4 screws on the top cover. Carefully remove the cover and its O-ring.
2️⃣ Remove the battery from the main board
Gently take out the internal components. Lift the electronics board and unplug the battery from its holder.
3️⃣ Disconnect the board from the old probe
Once the battery is unplugged, disconnect the main board from the sensor wires of the old probe.
4️⃣ Connect the board to the sensor replacement kit
Attach the main board to the wires of your sensor replacement kit.
5️⃣ Reconnect the battery to the main board
With the main board connected, take the battery and insert it into the designated holder on the board. Plug it back in.
6️⃣ Reposition the components in the kit
Carefully place the battery holder back inside the kit, followed by the main board.
7️⃣ Reinstall the cover and tighten the screws
Put the cover and O-ring back in place and firmly tighten the 4 screws.
8️⃣ Rub the cap with a magnet to wake the probe
Wake the probe by rubbing the cap with a magnet. A beep confirms it’s awake. Your updated EcO is ready to go!
Need More Help?
For a visual walkthrough, watch our step-by-step battery replacement GIF below.
If you have any questions, feel free to reach out to our support team!